• Chassis
  Slim X-type chassis, colour: black
  Dimensions: 250 x 200 x 78.5 mm (LWH)
  Weight: 1.9 kg net, 3.0 kg gross
  Open front – no concealed front panel connectors
  Hole for Kensington Lock at the back panel
• Operation Position
  (1) horizontal on its feet
  (2) vertical with the optional stand (Accessory PS01)
  (3) vertical with the supplied VESA mount bracket
• Power Adapter
  External 180 W power adapter (fanless)
  Input: 100~240 V AC, 50~60 Hz, max. 2.5 A
  Output: 19.5 V DC, max. 9.23 A, max. 180 W output wattage
  AC Connector with protective-earth contacts, cable length: 1.7 m
  DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
  Dimensions: ca. 167 x 82 x 25.5 mm = 350 ml
• Operating System
  This system comes without an operating system.
  It is compatible with Windows 10 and Linux (64-bit)
• Processor support
  Processor Socket LGA1200
  Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors
  Supports 10^th generation Intel Core processors, codenamed “Comet Lake-S” in 14 nm process technology
  Maximum supported processor power consumption (TDP) = 65 W
  Up to 10 CPU cores, 20 threads and 20 MB of L3 cache
  Does not support the unlock-function of Intel K-Series processors.
  The processor integrates PCI-Express, RAM controller and the graphics engine
  (Performance features depend on processor type [7])
  Please refer to the support list for detailed processor support information at global.shuttle.com.
  Not compatible with older Socket LGA 1151(v2) processors.
• Processor Heatpipe Cooling
  Processor cooling with heatpipe technology and two fans (60 mm)
• Mainboard / Chipset
  Mainboard in a Shuttle form factor proprietary design for the XPC XH410G
  Chipset/Southbridge: Intel® H410
  Passive chipset cooling with heat sink
  The Northbridge is integrated in the processor.
  Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability
• BIOS
  AMI BIOS, SPI Interface, 16 MB Flash-EPROOM
  Supports Hardware Monitoring and watch dog functionality
  Supports Firmware-TPM (fTPM) v2.0 [8]
  Supports boot up from external USB flash memory
  Supports Unified Extensible Firmware Interface (UEFI)
  Supports power on after power failure [1]
• Memory support
  2x SO-DIMM slot with 260 pins
  Supports DDR4-2666/2933 (PC4-21300/23466) SDRAM at 1.2 V
  Supports Dual Channel mode
  Supports a maximum of 32 GB per DIMM, maximum total size: 64 GB
  Supports two unbuffered DIMM modules (no ECC or registered)
  Note: The memory clock speed depends on the processor model. Intel Core i9 and i7 series processors support DDR4-2933 memory speed, while the other models support DDR4-2666.
• Integrated Graphics
  The features of the integrated Intel UHD graphics function
  depend on the processor type used. [7]
  Supports DirectX 12, OpenGL 4.5
  The PC features two video outputs:
  – 1x HDMI v2.0a (digital) supports 1080p/60 and 2160p/60
  – 1x D-Sub VGA (analog) supports 1080p/60
  The HDMI output supports displays with 4K Ultra HD resolution at 3840 x 2160 with 60 Hz refresh rate and support multi-channel digital audio over the same cable.
  Supports two independent displays with the integrated graphics function
  Supports Blu-ray (BD) playback with HDCP content protection [5]
  Hardware video decoding/encoding: H.264, H. 265 (8- and 10-bit, encoding via QuickSync), VP9 (10-bit VP9 can only be decoded)
• PCIe Expansion Slot
  1x PCI-Express X16 v3.0 slot with installed 90° Riser Card
  The used expansion card must meet the following conditions:
  – Maximum dimensions: 208 mm x 120 mm x 30 mm (Single Slot)
  – Maximum power consumption: 75 W
• Audio Function
  Audio Realtek® ALC 662 High-Definition Audio
  Two analog audio connectors (3.5 mm) at the front panel:
  (1) Microphone input
  (2) Headphones output (Line out)
  Digital 7.1 audio output: possible via the HDMI port
• Gigabit LAN Controller
  Intel i219LM network controller
  Supports 10 / 100 / 1.000 MBit/s operation
  Supports WAKE ON LAN (WOL)
  Supports network boot by Preboot eXecution Environment (PXE)
• 2.5″ Storage Bay
  This system features one 2.5″ drive bay which is accessible
  from the bottom of the housing.
  It supports one 2.5″ / 6.35 cm hard disk or SSD with max. 9.5 mm height.
  The system includes a pre-installed data/power cable [3].
  The connector supports SATA III with max. 6 Gbps.
• M.2-2280 M Slot
  The M.2-2280 M slot provides the following interfaces:
  – PCI-Express v2.0 X4
  – SATA v3.0 (6 Gbps)
  It supports M.2 cards with a width of 22 mm
  and a length of 42, 60 or 80 mm (type 2242, 2260, 2280) and
  M.2 SSDs with SATA or PCIe interface.
• M.2-2230 AE Slot
  The M.2 2230 AE slot has the following interfaces:
  – PCI-Express v2.0 X1
  – USB 2.0
  It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and other. A SATA interface for SSD cards is not available here.
• Internal USB Port
  This system features one internal USB port
  which is located behind the bottom cover of this PC.
  Connector: USB 2.0 Type A
  Maximum permitted size of the USB stick: 11.5 mm x 28 mm x 88 mm
• Front Panel connectors
  1x Microphone input (3.5 mm)
  1x Headphones output (3.5 mm, line out)
  2x USB 3.2 Gen 1
  2x USB 2.0
  1x Power button with Power LED (blue)
  1x HDD LED (yellow)
• Back Panel connectors
  1x HDMI 2.0a digital audio/video output, supports screw lock [4]
  1x VGA / D-Sub analog video output
  2x USB 3.2 Gen 1
  2x USB 2.0
  1x GigaBit LAN (RJ45, Intel i219LM)
  1x DC-input connector for external power adapter (supports 19.5 V)
  1x 4-pin connector (2.54 mm pitch) supports:
  – external power on button
  – Clear CMOS function
  – +5V DC voltage for external components
  2x perforation for optional Wireless LAN antennas
  1x hole for Kensington Lock
• Other onboard connectors
  2-pin onboard ATX connector with 5V (max. 2 A) output voltage with 4-pin Molex adapter cable
  Power-on-after-power-fail (hardware solution by jumper) [1]
  RS232 COM port (2×5-pin header, 2 mm pitch)
  Front connector for power button, LEDs, USBs, audio ports
  4-pin fan connectors (occupied by the CPU cooling system)
  4-pin USB 2.0 connector (occupied by the internal USB port)
  2x 5-pin debug port
• Supplied Accessories
  Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
  Driver DVD
  Bracket for one 2.5″ drive with screws
  External power adapter with 1.7 m power cord
  VESA mount bracket (metal) supports 75×75 and 100×100 mm standard with four screws M4x10
  Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
  CPU heatpipe cooling system with heatsink compound
• Optional Accessory
  – PS01: Vertical stand
  – WLN-M: WLAN module 802.11ac + BT4.0 with two external antennas [6]
  – PCP11: Backpanel COM port adapter for RS232 serial interface
  – CXP01: Adapter cable for external power button

Product Enquiry